Guide ยท updated 2026-11-16
The 16 sections of a safety data sheet
Every GHS-based safety data sheet has the same 16 sections in the same order. This holds in the EU (REACH Annex II), Great Britain, the US (OSHA HazCom, Appendix D), Canada (WHMIS) and Australia. The headings differ a little between regions. What goes in each section is nearly the same everywhere. Below is what each section needs, and where the information usually comes from for a small maker.
| # | Section | What goes in it | Where you get it |
|---|---|---|---|
| 1 | Identification | Product name, recommended use, supplier name, address, phone, emergency phone | You |
| 2 | Hazard identification | Classification, pictograms, signal word, H- and P-statements, other hazards | Calculated from section 3 and from measured flash point |
| 3 | Composition | Hazardous ingredients with CAS/EC numbers, concentration (ranges allowed) and classification | Your recipe and your suppliers' SDSs |
| 4 | First aid | What to do after inhalation, skin or eye contact, or swallowing; symptoms; need for medical attention | Follows from the hazards |
| 5 | Firefighting | Suitable and unsuitable extinguishers, combustion products, advice for firefighters | Follows from the form and flammability |
| 6 | Accidental release | Personal precautions, environmental precautions, clean-up methods | Follows from the hazards and the form |
| 7 | Handling and storage | Safe handling, storage conditions, incompatibilities | Follows from the hazards |
| 8 | Exposure controls | Occupational exposure limits, ventilation, gloves, eye and respiratory protection | National exposure-limit lists; the ingredient SDSs |
| 9 | Physical and chemical properties | Physical state, colour, odour, melting and boiling point, flash point, pH, density, solubility, viscosity | Your own measurements or a lab |
| 10 | Stability and reactivity | Reactivity, stability, conditions and materials to avoid, decomposition products | Ingredient SDSs |
| 11 | Toxicological information | Each health hazard class, with data or the reason it is not classified | Calculation plus ingredient SDSs |
| 12 | Ecological information | Aquatic toxicity, persistence, bioaccumulation, mobility, PBT assessment | Calculation plus ingredient SDSs |
| 13 | Disposal | Waste treatment methods | Standard wording plus local rules |
| 14 | Transport | UN number, shipping name, class, packing group, environmental hazard | Dangerous goods rules (ADR, IMDG, IATA, DOT) |
| 15 | Regulatory information | Laws that apply to the product in the market of sale | Region |
| 16 | Other information | Revision date, full H-statement texts, abbreviations, method used | You |
The sections only you can fill in
Most sections follow from the classification. A good generator fills them in for you. Four things cannot be worked out from paperwork:
- The emergency phone number (section 1). In many countries this is the national poison centre or a paid 24-hour service. The number has to be staffed during the hours you state.
- Flash point and other physical data (section 9). These are measured, not calculated. For liquids with flammable ingredients, the flash point decides the flammability classification.
- Exposure limits (section 8). These are taken from your country's list for each ingredient.
- Transport (section 14). Shipping rules have their own criteria. A dangerous goods adviser or your carrier should confirm the entry.
Common mistakes
- Copying the fragrance supplier's classification as if it were the classification of the candle. The fragrance is diluted, so the candle usually carries fewer hazards. Sensitisers above their limit still count.
- Giving exact percentages when ranges are allowed. Ranges protect your recipe. The EU sets standard ranges for some cases, so check them.
- Leaving out the revision date, or never updating the SDS when the recipe or a supplier's SDS changes.
- Labels that do not match section 2.
Plainsheet drafts all 16 sections from your recipe and leaves clear gaps for the parts only you can supply.
Start a safety data sheet
Start a safety data sheet
Sources
- REACH Regulation (EC) No 1907/2006, Annex II, as amended by Regulation (EU) 2020/878.
- OSHA 29 CFR 1910.1200, Appendix D (Safety Data Sheets).
- UN GHS, Annex 4 (Guidance on the preparation of SDS).