Plainsheet

Guide · updated 2026-11-16

CLP hazard label requirements

If your mixture is classified as hazardous, every package needs a hazard label. In the EU and GB, CLP Article 17 lists what it must show. GHS-based systems elsewhere ask for broadly the same elements.

What the label must show

  1. The supplier's name, address and telephone number.
  2. The nominal quantity, for packages sold to the general public, unless it is shown elsewhere on the pack.
  3. Product identifiers. These are the trade name, plus the names of the substances responsible for certain hazards: acute toxicity, skin corrosion, serious eye damage, sensitisation, CMR, STOT and aspiration. Normally no more than four names are listed.
  4. Hazard pictograms.
  5. The signal word, "Danger" or "Warning", if one applies.
  6. Hazard statements (H-statements).
  7. Precautionary statements (P-statements). Normally no more than six.
  8. Supplemental information, such as EUH208 or EUH210.
  9. The UFI, if the mixture has been notified to poison centres.

Minimum label and pictogram sizes

Package capacityMinimum label sizeMinimum pictogram size
Up to 3 litres52 × 74 mm, if possible10 × 10 mm (at least 1 cm²)
More than 3 L, up to 50 L74 × 105 mm23 × 23 mm
More than 50 L, up to 500 L105 × 148 mm32 × 32 mm
More than 500 L148 × 210 mm46 × 46 mm

Each pictogram must also cover at least one fifteenth of the area of the label that carries the hazard information. Pictograms are black symbols on a white background with a red border. The 2024 revision of CLP (Regulation (EU) 2024/2865) adds minimum font sizes and other layout rules. Check the dates that apply to your products.

Pictogram precedence

Precedence of statements

If H314 applies, H318 is not shown, because H314 already covers eye damage. In practice, H410 usually replaces H400. Choose P-statements that fit the product and the user, and keep to six where you can. For consumer products, P101 and P102 are commonly used.

Plainsheet applies these rules, picks the statements and prints labels at the sizes in the table above.
Make a label

Sources